Yes, yes I know I should finish other projects first, but I have yet another electronics project I want to start playing with, and this post is more for a reminder of what it was I was aiming to achieve more than anything else.
As I have been falling more and more down the self sufficient/home made produce rabbit hole, I have noticed that I need more and more data for certain things, so that I can then act upon it, or even better yet, have an automated system to act apon it for me.
The two things I am thinking of, are specifically the (dry) curing of meats such as salami’s and the aging of cheese. Both these are reliant on maintaining the right temperature and humidity within a certain range for a prolonged period of time, ranging from weeks to years depending on what your wanting to achieve. Now in the past this has been what I have been designing SafeDuino to do, and whilst that does other things in addition to monitoring temperature and humidity, some of those more advanced are not needed by the monitoring and control software.
Whilst it may be more benficial to “recycle” code from the SafeDuino project. I am finding myself drawn more and more to the Particle Photon system for these basic requirements as not only as it generally cheaper than the Arduino’s (Freetronics EtherTen and EtherMega) I have been using, but it does come with built in WiFi. Conversly I then have to supply power to the device, either through a paraciticle connection to something else, a dedicated connection to it, or a Solar/Wind & Battery solution, where as the EtherTen and EtherMega boards (with the use of a PoE module) can pull power from the PoE switching equipment I have in the house. A wired connection is always going to be more reliable and faster anyway, although the speed is irrelevent when your doing so little data transfer. Using wireless also means I need to ensure that I have wireless access at each point on the property where I want a monitor, which is easier said that done when we have a large property, much larger than any one or two wireless points can handle, although this is due mainly to the construction materials of the buildings on the property and the distances involved.
This leaves me wondering how to achieve this. Given the design of what I want to achieve, being able to control one or more chambers, through one or more devices I am thinking I need to build it as to make extensive use of 1 wire and I2C technologies, ideally linking back to a Paricle Photon (it has considerably more processing power than an Arduino) and then back to a server. Simular to what they have done with BrewPi, but this means as I said above power supply issues to due no PoE connector, and connectivity issues…
Anyway I will think on it further, but I will most likely end up using the Particle Photon.
What I need to achieve however is rather simple, as I said above monitoring one or multiple “chambers” from a single root node (the Particle Photon) and reporting the data back to a server, where it can be further processed and acted upon if need be. These “chambers” can be joined, or independent, and may or may not have one or more common components (think combo fridge/freezer where the compressor is common to both).
Each “chamber” must be capable of having unique settings (within reason, you cannot expect it to keep one chamber at 30 degrees Celcius and the other at 10, its just not going to happen if you have common components) and be able to work out how to handle this.
I guess it is time to start designing (and finishing off other projects)