After having not had much time to work on this project in the past few months, with a major half-million dollar project going on at one of my clients, which was/is the implantation of a new computer system of my own design that will be serving them for the next 20 years or more (well the physical infrastructure will be, the PC’s wireless, network, servers etc won’t they are replaced on a 3 year cycle, again on my insistence) and with one of the suppliers delivering critical components in excess of week late it has pushed back the final deployment for a couple of months as now I can only do core works on weekends and after hours, I have not had much time for this project.
What I have been doing/contemplating is two things however, firstly is whether I need an LCD screen/buttons interface, and I have decided that I do need one, this has become evident so that I can set up the system “in place” when it is finally deployed.
The other thing I want to do is be able to deploy some sensors and control circuits remotely, including some in hard to access places, well ones that once they are in they will not be easily accessible. To this end I have come up with the idea of using network cable for limited power (5VDC for system power) and command and control signals, and where required I will use Flat-Flex Cables’ (FFC’s) to get into those tight spots that I cannot otherwise support sensors in.
What this leaves me with is a system that is essentially divided into three distinct parts, the main controller (the Freeduino EtherMega) the distribution node which is connected to the EtherMega via network cable, and the sensors and control points are connected to the distribution nodes via CAT3 (telephone) cabling or via FFC’s (which are limited to 18″) where required.
This now leaves me of working out how to select which pins go to which distribution point via the network cabling, this I am still trying to solve, however jumper wires are looking like the best option at this point