HangGoose: The Evolution of a Design?

I am a SCUBA diver, licensed for 40Meters (~130 Feet) with IANTD Advanced Nitrox endorsements, and ultimately I aim to get up to Trimix rebreathers, but that is still a ways off. Anyway, with SCUBA, it is imperative you keep your gear in top condition and more so with mixed gas and technical diving as a failure at depth can easily be fatal.

Wetsuits, drysuits and the other protective equipment such as the booties, hoods and gloves retain water, (drysuit as the name suggests, doesn’t but it still is wet externally) are central to the safe (and comfortable) diving in the area I live, and for maintenance it is imperative to dry these out properly to maximise the life of them it does this by helping prevent mould or other nasties growing inside the equipment.

Most people put their wetsuits on a normal coat hanger style device to dry them out. This, however is not so good for the equipment as the added weight of the water, in the case of some wetsuits is quite a bit (in my case its about 5KG of water is retained by the suit) and this puts extra strain on the shoulders of the suit where it is hung on a conventional hanger, leading over time to weakening and degradation, and over time failure of the materials in this area of the wetsuit.

This is where the HangGoose comes in, hangs the wetsuit at its waistline putting the area of support for the suit over a larger area thereby causing less strain on any one section of the suit. This is evident through simple logic as if a suit hung by its shoulders at lets say 10KG (weight of the suit plus the weight of the water) then all 10KG is hanging below (and on) the shoulders with all the weight pulling in one direction. Conversely if we hang it at its midpoint then whilst the 10KG is still putting downward strain on the wetsuit, due to it having two downward points there is only half the strain and weight of the suit on any one point as they are balanced on the HangGoose, thereby reducing the amount of strain experienced by the suit which in turn extends its useful life. The other benefit of the midpoint hanging is that you have two “low points” allowing the water to drain (under gravity) from both the upper and lower half of the suits simultaneously, and with only having half the distance to travel the water drains quicker, drying the suit quicker.

The HangGoose, as shown below this is really nothing more than a fancy coat hanger, but this one is designed for surfers mainly. However many people are using it for SCUBA wetsuits as well, as the wetsuits involved are similar enough (generally they are just thicker) that it suits that purpose.

WP 20130718 001

WP 20130718 003

 

Now Recently I was sent an email stating that the price of the HangGoose would go up at the end of that month, considering that with the falling Australian Dollar, and the fact I was looking at getting a Drysuit so I could dive a little more comfortably during the winter period, I decided to grab one before the price went up, nothing unusual there. What did catch me by surprise though was the fact that when it arrived a week or so later, the design had changed considerably.

This is what I first saw when I got it out of the box;

WP 20130718 008
A bit of a change in this version hey…

 

Now as shown in the first set of pictures the design for the HangGoose was and is purely functional, some pieces of reclaimed teak, or at least the original was claimed that it was (something about floorboards if I recall correctly), the site now claims that it is heirloom quality teak. The new design has changed from this “chunky” original design, to a new design on the suit hanging area that is more rounded, I was taken a bit aback by this considering that the original design as above is still predominantly featured on their home page, and yes whilst the new design is in the photo gallery I did not look at that, as I had no need to see it being used as I had one.

Below is a side by side comparison of the two HangGoose wetsuit areas:

WP 20130718 004WP 20130718 009

 

As you can see the design has changed to a more “elegant” rounded one, and whilst I like the original, I do believe that the new design will provide a better support to the wetsuit or drysuit hung off it, all in all I am happy with the new design.

All in All I love both my HangGoose’s (HangGeese?) and I highly recommend them

Written By Justin

Leave a Reply

Your email address will not be published. Required fields are marked *

2 × 2 =